2009/2010/2011/212 1986 Chevy 4X4 Rebuild
Two wheel drive to four wheel drive
frame modification - Cab swap.
 


Page 1  Page 2  Page 3  Page 4  Page 5  Page 6  Page 7  Page 8  Page 9  Page 10
 Page 11  Page 12  Page 13  Page 14  Page 15  Page 16  Page 17


02/03/12      
Aligning the cab on the frame.




01/27/12      







From the archives: John and Amber a long time ago.


01/20/12      

When the first Suitor's Garage truck build started back in 2002 we spent hours on the the computer searching out the many questions we had. Information was sparse and not detailed. That was the genesis of what became the "Projects" page on our website. We figured that if we were doing this, others would be as well.  A lot has changed in 10 years.

In the photo above John is talking to fellow 73-87 Chevy Trucks forum member "firefighter." He lives in Iowa and is at about the same stage on his
rebuild of a 1976 Chevy 3/4 ton 4x4.  John had some gas pedal/throttle cable questions and firefighter graciously helped out by going out to his garage, hooked up the linkage and took some measurements. It sure is a small world nowadays.


Previous Page
Page 1  Page 2  Page 3  Page 4  Page 5  Page 6  Page 7  Page 8  Page 9  Page 10
 Page 11  Page 12  Page 13  Page 14  Page 15  Page 16  Page 17


Home Page | Projects | News | Racing